Yeastar TA100 is an Analog Telephone Adapter that provides 1 analog interface for

residential users and small business to convert existing analog equipment to

IP-based networks cost effectively.

Specifications

Ports		1 FXS Port
Telephony Interfaces		RJ11
LAN		1 10/100 Mbps
Micro USB Port		1
Protocol		SIP (RFC3261)
Transport		UDP, TCP, TLS, SRTP
Codec		G.711 (aLaw/uLaw), G.729A/B
DTMF Mode		RFC2833, SIP Info, In-band
Voice Capability		ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer
Fax		T.30 Pass-through
QoS		DiffServ, ToS, 802.1 P/Q VLAN tagging
Network		DHCP, OpenVPN, PPPoE, Static Route, VLAN
Network Protocol		FTP, TFTP, HTTP, HTTPS, SSH
Management Protocol		TR-069*
Signaling		FXS Loop Start, FXS Kewl Start
Caller ID		BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID
Disconnect Methods		Busy Tone, Polarity Reversal
Power		DC 5V 1A
Dimensions (L × W × H) (mm)		85 x 58 x 24
Humidity		10-90% non-condensing
Storage Range		-20°C to 65°C, -4°F to 149°F
Operation Range		0°C to 40°C, 32°F to 104°F
Mounting		Desktop
Compatibility		Interoperable with 3CX, Asterisk, Lync Server, FreePBX and certified with Elastix and BroadSoft