FXS Gateway TA400
Yeastar TA400 supports 4 FXS ports to connect analog phones to IP-based data networks.
It is compliant with SIP industry standard and compatible with various PBXs, IP-PBXs, softswitches, and phones.
TA400 is a stand-alone FXS VoIP gateway with carrier-grade features and reliability.
Featuring book-like design, TA400 is elegant in appearance and flexible in installation. It is a desktop device and also wall mountable. Place it on the table, it not only provides convenient connection of analog phones but also decorates your office pleasantly. Mount it on the wall, it saves you space and gives you more flexibility.
TA400 has an easy-to-use Web interface which allows super easy and straightforward configuration.
Specification
Ports | 4 FXS Ports | |
Telephony Interfaces | RJ11 | |
Network Interfaces | 1 10/100BASE-T Ethernet | |
Protocol | SIP (RFC3261), IAX2 | |
Transport | UDP, TCP, TLS, SRTP | |
Codec | G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A, GSM, ADPCM | |
Voice Capability | ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer | |
DTMF Mode | RFC2833, SIP Info, In-band | |
Fax | T.38 and Pass-through | |
QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging | |
Network | DHCP, DDNS, OpenVPN, PPPoE, Static Route, VLAN | |
Network Protocol | FTP, TFTP, HTTP, HTTPS, SSH | |
Management Protocol | RADIUS, TR-069* | |
Signaling | FXS Loop Start, FXS Kewl Start | |
Caller ID | BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID | |
Disconnect Methods | Busy Tone, Polarity Reversal | |
FXO Connectivity | – | |
Power | 12V, 1A | |
Dimensions (L × W × H) (mm) | 200 × 137 × 25 | |
Humidity | 10-90% non-condensing | |
Storage Range | -20°C to 65°C, -4°F to 149°F | |
Operation Range | 0°C to 40°C, 32°F to 104°F | |
Mounting | Desktop, Wall-mount | |
Compatibility | Interoperable with 3CX, Asterisk, Lync Server, FreePBX and certified with Elastix and BroadSoft |